Industrial Purified Water Dispenser Parts
Basic parts of industrial purified water dispenser
Industrial purified water dispensers consist of various components. These components allow water to be purified, stored and distributed. Here are the basic parts of industrial purified water dispenser:
1. Water Inlet and Pre-Filters
Water Inlet: Provides mains water connection.
Pre-Filters: Often called sediment filters, they remove large particles and impurities such as sand and rust in the water.
2. Filtration System
Activated Carbon Filters: Removes chlorine, organic compounds and bad tastes and odors.
Sediment Filters: Cleans fine particles and sediments in water.
Reverse Osmosis (RO) Membrane: It removes dissolved minerals and salts in the water and purifies the water to high purity.
UV Sterilization Unit: Kills microorganisms and bacteria in water.
3. Water Tank
Cold Water Tank: The compartment where cold water is stored and made ready for use.
Hot Water Tank: The compartment where hot water is stored and made ready for use.
Room Temperature Water Tank: Some models have an additional tank where room temperature water is stored.
4. Pumps and Pressure Regulators
Pump: It ensures the effective operation of the filtration system by increasing the water pressure.
Pressure Regulators: Controls water pressure and keeps it constant.
5. Tap and Distribution System
Taps: Allow users to get water. There are usually separate taps for hot, cold and room temperature water.
Distribution System: Allows water to be distributed to taps and other outlet points.
6. Electronic Control Unit
Control Panel: Used to set and monitor the operating parameters of the water dispenser.
Indicators and Screens: Shows temperature, filter change time and other important information.
7. Cooling and Heating Unit
Cooling Unit: Keeps the water at the desired coldness. Usually compressor or thermoelectric cooling technology is used.
Heating Unit: Keeps the water at the desired temperature. They are equipped with electric heaters.
8. Case and Structural Components
Stainless Steel Case: Provides a durable and hygienic outer surface.
Internal Pipes and Connections: Allows water to be transported between various components.
9. Dropper and Wastewater System
Dripper: Collects drippings under the faucet.
Waste Water System: Provides the discharge of waste water generated during the filtration process.
These components of industrial purified water dispensers ensure the purification, storage and safe distribution of water, providing the user with consistently clean and healthy drinking water.